PLEASE SELECT THE DESTINATION COUNTRY AND LANGUAGE :
1050℃ economic muffle furnace (3L)
- Economic muffle furnace with flap door
- General laboratory use and ashing process
- Recommended ideal running temperature is below 850℃
- Heating from 3 sides
- Excellent outgassing thanks to the exhaust air outlet on the head of chamber, i.e plastic polymer
- Single housing
- Ceramic fiber materials which are not classified as carcinogenic
- Light weight
- Prompt heat up and good maintaining
- SSR operation and PID control provides low noise operation and precise temp control (+/-1℃)
Specification
Model | SH-FU-3MGE |
Max temperature | 1050℃ |
Continuous running temperature | 850℃ |
Chamber volume | 3liters |
Controller | Digital PID controller |
Sensor | K type |
Heater | 1.1kW |
Heating element | KANTAL A-1 with ceramic fiber |
Insulation | Ceramic |
Power supply | 110V, 50/60Hz, 1p, 10A 220V, 50/60Hz, 1p, 5A |
Net weight | 19kg |
Chamber size | 130x220x110mm |
External size | 300x380x410mm |
* Surface Temperature Data * Temperature Recovery Data
Here is the proud supply reference of SH Scientific Muffle Furnace, Tube Furnace and Vacuum Furnace from customers and industries in US and Canada.
● Destructive testing laboratories who carry heat treatment of ceramic, alloy, titanium and etc for aerospace and metallic production industries.
● Building companies who transforms metallic power such as nickel alloy into sintered materials by sintering.
● Material technology providers who develop polymer composites and graphene materials.
● Aerospace companies who perform cyclic oxidation test between 1700C to room temperature in atmosphere-controlled environment.
● Medical and healthcare companies who need analysis of ashes and contents through combustion of materials.
● Material innovation companies who do sintering in vacuum or in inert gases.
● Subsea and surface injection system companies who need vacuum furnace for softening cycles, annealing and age hardening of Inconel 718 tubes.
● Analytical research labs who perform various material testing with thermal treatment.
● Medical implants manufacturers who anneal alloy powders.
● Material scientists in universities who do sintering materials such as polymer-derived ceramic parts.
● Applied science engineers who process solid oxide fuel cells (SOFC).
● Environmental and chemical researchers who need combustion of materials.
● Regulatory compliance service providers in the areas of hazardous waste thermal treatment, air permitting, air pollution control, contaminated soil remediation, and hazardous waste management.
● Metallic parts manufacturers who need vacuum brazing and heat treating for steel.
● Water treatment companies who test glass content in FRP (fiber reinforced polymer) products according to ASTM D2584.
● Semiconductor manufacturers who anneal Gallium nitride (GaN) semiconductor wafer.
● Engineering companies who do curing and sintering solutions in porous ceramic tubes.
● Civil engineers who need soil combustion.
● University labs who anneal Si wafer in vacuum condition.
● Chemistry research departments who do the thermal treatments (stabilization in air and carbonization in argon) of carbon nanofiber precursors.
● Marine equipment manufacturers who analyze ash content in marine HFO (Heavy Fuel Oil).
● Graphene solution companies who produce graphene-based materials by CVD (Chemical Vapor Deposition) method. CVD furnace
● Solid state battery manufacturer with polymer electrolyte, oxide electrolyte, sulfide electrolyte, phosphate electrolyte and etc.